Suitable for increasing flow rate to a 4040 RO membrane. This RO booster pump can approximately halve your normal filling time. Proven to lengthen the life of Pre-Filters and RO Membranes. As an example, this booster pump has been installed before an RO membrane, which reduced dissolved solids output from 335ppm to 5ppm, before filtering through DI Resin for the final polishing stage. This means the DI Resin doesn't need to be replaced as frequently.
Providing the optimum pressure for your filters and membrane, this pump speeds up your filling time, lowers your TDS meter reading and ensures your system maintenance costs are as low as possible!
This booster pump includes an Automatic Flow Controller. This is a pressure control switch, and will protect the pump by switching it off when at maximum pressure. This controller will also switch the pump off if the input water flow stops, ensuring the pump does not run dry.
PLEASE NOTE: IF USING A STANDARD MECHANICAL BALL VALVE, ONLY PURE WATER OUTPUT WILL SHUT OFF AUTOMATICALLY. WASTE WATER OUTPUT WILL NOT SHUT OFF AUTOMATICALLY. IN ORDER TO SHUT OFF BOTH PURE AND WASTE WATER OUTPUT, AN ELECTRONIC FLOAT SWITCH OR SIMILAR IS REQUIRED. FOR FURTHER ADVICE, PLEASE GET IN TOUCH.
- Clarke Stainless Steel Pump
- 1200w - 230v
- Open Flow Rate: Up to 61 Litres Per Minute (LPM)
- Self Priming
- Corrosion and Rust Proof Construction
- Automatic Pressure Control Switch
- Max. Working Temp 60°
- 1/2" Spigot Fittings Included (Suitable for 13mm Hose)
BOOSTER PUMPS ARE FULLY ASSEMBLED, READY FOR USE - DISPATCH TIME 2-4 WORKING DAYS
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.